Ultrasonic Level Sensor – dB Series
The dB Transducer Series is a range of non-contacting ultrasonic transducers for level, volume and flow measurement. Available in a variety of models and compatible with all Pulsar controllers so that you have a specific solution to suit your application requirements.
Description
- Non-contact Ultrasonic Level Sensor
- For measuring Liquid or solid levels, volume or flow rate
- Measurement range : 3-50m
- Used in conjunction with Pulsar Controllers
Specification
Catalog PDF| Model |
Range Dimensions Beam Angle |
| dB3 |
0.125 - 3m 78D x 115Hmm < 10 ° |
| dB6 |
0.3 - 6m 86D x 106Hmm < 10 ° |
| dBS6 |
0.2 - 6m 86D x 106Hmm < 10 ° |
| dB10 |
0.3 - 10m 86D x 106Hmm < 10 ° |
| dB15 |
0.5 - 15m 86 D x 122Hmm < 8 ° |
| dB25 |
0.6 - 25m 105D x 142Hmm < 6 ° |
| dB40 |
1.2 - 40m 205D x 223Hmm < 5 ° |
| dB50 |
2.0 - 50m 205D x 223Hmm < 5 ° |
|
All Transducer Models |
|
| Sensor body material: |
Valox 357 U and syntactic form face |
| Cable lengths: |
Standard = 5m, 10m, 20m or 30m. Optional: up to 150m maximum (increments of 10m only) |
| Mounting connection: |
BSP or 1” NPT |
|
Environmental |
|
| Enclosure protection: |
IP68 / NEMA 6P |
| Max. and min. temp (electronics): |
-40°C to +90°C hazardous area version: -40°C to 75°C |
|
APPROVALS: |
|
| CE approval: |
2014/30/EU - EMC & 2014/34/EU ATEX Directives. Standards applied: EN 60079-0:2012+A11:2013/EN 60079-11:2012 / EN 60079-18:2009 / EN 60079-26:2007 / EN 61326-1:2013l |
| ATEX approval: |
Standard ATEX EEx m II T6 or optional EEx ia IIC T6. FM/FMC approval. (dB50 not approved) |
|
Performance |
|
| Accuracy: |
0.25% or 6mm whichever is greater |
| Resolution: |
0.01% or 2mm whichever is greater |