FlowCERT
The FlowCERT open channel flow meter provides comprehensive flow monitoring with data logging and control functions for a complete range of flumes and weirs.
It is compatible with a range of sensors in order to create a flow metering system to suit your application.
Description
- Flow Meter Controller
- Data output: 4-20mA, RS232
- 5 x Volt free contacts
- Sensor input: Speedy, Microflow, level transducers
Specification
Catalog PDF|
PHYSICAL: |
|
| Dimensions: |
235 x 184 x 120mm |
|
ENVIRONMENTAL: |
|
| Enclosure protection: |
IP65 / NEMA 4X |
| Max/min temperature: |
-20 to +50 deg℃ |
|
PERFORMANCE: |
|
| Echo processing: |
DATEM (Digital Adaptive Tracking of Echo Movement) |
|
OUTPUTS: |
|
| Analogue outputs: |
2xIsolated (floating) output (to 150V) of 4-20mA or 0-20mA into 500Ω (user programmable and adjustable) 1μa resolution |
| Digital output: |
Full Duplex RS232 |
| Volt free contacts, number & rating: |
5 form “C” (SPDT) rated at 5A at 115V/240Vac |
| Display: |
6 digits plus 12 charact text, plus bargraph with direction indicators, remote communicator identifier and program/run/test mode indicators |
|
INPUTS: |
|
| Analogue inputs: |
Isolated (floating) input (to 150V) of 4-20mA or 0-20mA source or sink, open circuit voltage (source) 33V, 22V at 4mA, 14V at 20mA (user programmable and adjustable) 0.1% resolution |
| Velocity input: |
Via RS485 digital communications interface |
| Sensor input: |
Speedy, Microflow, level transducers |
|
PROGRAMMING: |
|
| On-board programming |
By integral keypad |
| PC programming: |
Via RS232 |
|
SUPPLY: |
|
| Power supply: |
115VAC +5% / -10% 50/60Hz, 230VAC +5% / -10% 50/60Hz, 22-28VDC, 10W maximum power (typically 6W) |
| Fuses: |
100mA at 230VAC, 200mA at 115VAC |