Flow Monitor
Flow Monitor is designed for use with Pulsar’s Flow Pulse sensor in fixed or permanent installations.
The Flow Monitor is powered using either an AC or DC power supply which then provides the Flow Pulse sensor with power and offers an interface via a 4-core cable.
Flow Monitor expands the capability of the Flow Pulse flow sensor by providing two relays that can be programmed as alarm (relay 1) or control (relay 2) for flow or velocity, or alternatively programmed as a totalizer.
Description
- Setup of FlowPulse sensor
- Display for flow / velocity from a single FlowPulse controller
- Two programmable relays for control and alarm
Specification
Catalog PDF| Controller Body Dimensions |
130 mm x 150 mm x 63.5 mm (5.12 in x 5.9 in x 2.5 in) |
| Weight |
0.65 kg (1.42 lbs) |
| Enclosure Material |
ABS base with polycarbonate lid, flammability rating UL94HB |
| Maximum Separation |
500 m (1,640 ft) |
| Max and Min Temperature (Electronics) |
-20 °C to +50 °C (-4 °F to +122 °F) |
| Operating Voltage |
85-264 V AC 50/60 Hz, 22-28 V DC |
| Power Consumption |
10 W maximum power (typically 8 W) |