Tipping Bucket Rain Gauge – TKF Series
Tipping bucket Rain Gauge made of Stainless Steel with optional heaters. When the bucket turns over, the reed switch detects for container turning over action, and contact pulse signal is output.
The optional Film Heater results in lower power consumption than traditional heating elements.
Description
- Heating Option is available
- JMA Certificate
- 0.5 or 1mm bucket size
- Upper Heater and/or Lower heater
- Single or Dual Contacts
Specification
Catalog PDF|
TKF-1 TKF-2 |
|
| Detection method |
Tipping Bucket |
| Diameter |
Ø200mm |
| Bucket Size |
0.5mm 1.0mm |
| Accuracy |
Rainfall: <20mm/hr, ±0.5mm Rainfall: <40mm/hr, ±1.0mm |
| Output signal |
No voltage contact (dual connections) |
| Contact Time |
0.1～0.15 seconds |
| Insulation resistance |
DC 500 V 500 MΩ or more |
| Withstand voltage |
AC 1000 V for 1 minute |
| Material |
Outer Jacket - Stainless Steel |
| Dimensions |
Ø200mm x 450mm Height |
| Weight |
3.5 to 5kg (subject to options) |
| Inclusions |
Dual filter |
| Options |
|
| Heater |
Upper Heater (-U), Upper and Lower Heater (-UD) |
| Output Signal Connection |
Single Output Connection |
| Wind Shield |
Please contact |