WIND SENSORS “PRO-WEA”

The universal-genius…
with improved protection against electrostatic discharge!
Thus these high-tech sensors are predesignated for operation in lightning prone regions.

The design is aerodynamically optimised, the housing and the measuring elements are made of seawater resistant aluminium. The integrated, controlled heating and the optionally available cable with high UV-resistance are further advantages.

PRO-WEA sensors are robust and best suited for year-round applications in most climatic zones.

Description

  • improved protection against electrostatic discharge
  • especially robust due to reinforced axis
  • high measuring range of 60 m/s
  • low starting values of < 0.5 m/s

Specification

Catalog PDF

Wind Sensors PRO-WEA

(14523) Wind direction

(14524) Wind speed
Measuring elements:

wind vane • aluminium special surface

3-armed cup • aluminium special surface
Measuring range:

0...360°

0.5...60 m/s
Accuracy:

± 2°

± 0.3 m/s ≤ 10 m/s · ± 0.5 m/s...60 m/s
Resolution/ Starting value:

< 1° • < 0.5 m/s

< 0.1 m/s • < 0.5 m/s
Weight:

0.4 kg

0.35 kg
Output:

4...20 mA = 0...360° · 4 Hz update rate

4...20 mA = 0...60 m/s · 4 Hz update rate

At the current output (4..20 mA) a load of max. 600 Ohm must not be exceeded.
Measuring principle:

Hall Sensor Array, non-contact
Range of application:

temperature -40...+70 °C · heated • wind speed max. gusts 100 m/s • humidity 0...100 % r.h.
Supply voltage:

24 VDC (20...28 VDC) · 18 W heating· max. 800 mA · The heating within the sensor head prevents blocking of the moving parts under most climatological conditions.
Housing:

seawater-resistant aluminium · IP 65 in upright position · M12 cable-plug connection · stainless steel nut and lock washer
Included in delivery:

1 sensor • 15 m cable · with 4 pin M12 plug connector

Category