ULTRASONIC SENSOR “u[sonic]”
The all new combined ultrasonic sensor u[sonic]…
for wind direction and wind speed.
This seawater resistant sensor is perfectly heated and ideal for use under cold climate conditions.
The equipment is connected by an 8 pole screw connector. The measured values can be requested over a variety of interfaces.
Description
- Ultrasonic Wind Sensor
- Range: Wind dir. 0...359.9°, Wind speed 0...75 m/s
- Accuracy: Wind direction < 2°, Wind speed ± 0.2 m/s
Specification
Catalog PDF|
(16470) Combined Ultrasonic Wind Sensor u[sonic] |
|
| Parameter: |
Measuring range: Accuracy: Resolution: |
| Wind direction: |
0...359.9° < 2° (> 1 m/s ) RMSE 0.1° |
| Wind speed: |
0...75 m/s ± 0.2 m/s RMSE (v < 10 m/s); 0.1 m/s |
| Response threshold: |
0.1 ms (adjustable for wind direction) |
| Measuring rate: |
0.1...10 Hz • (internal measurement 50 Hz) |
| Operating conditions: |
-40...+70 °C (with heating -50...+70 °C) • 0...100 % r. h. |
| Power supply: |
6...60 VDC • 24 VAC/DC |
| Current consumption and power input: |
sensor: typ. 35 mA at 24 VDC and deactivated analog output •with heating: configurable 60 W/ 120 W/ 240 W/ max. 310 W at 24 VAC/DC |
| Housing: |
seawater-resistant aluminium · IP 65 |
| Dimensions/ Weight: |
Ø 199 mm · height 149 mm · approx. 2 kg |
| Communication: |
|
| Output (Serial): |
RS-485, RS-422(opt), SDI-12(opt) |
| Output (Analog): |
4-20mA (0…65m/s), 0…20mA(opt), 0…5V (opt), 0…10V(opt) |
| Protocols: |
NMEA 0183 • WIMWV · WIMTA • SDI-12 • Modbus (update in progress) |